Shenzhen Hunt Electronics Co., Ltd
Shenzhen Hunt Electronics Co., Ltd Shenzhen Hunt Electronics Co.,Ltd. is primarily engaged in developing and manufacturing semiconductor products.
Add to Cart
Q00UJCPU Mitsubishi Q Series PLC CPU, Ethernet Networking Mini USB Interface, 40 kB Program Capacity
| For Use With | MELSEC Q Series | |
| Number of I/O | 256 | |
| Manufacturer Series | Q Series | |
| Network Type | Ethernet | |
| Communication Port Type | USB | |
| Program Capacity | 40 kB | |
| Programming Interface | Mini USB | |
| Maximum Inputs/Outputs | 256/8192 | |
| Width | 98mm | |
| Dimensions | 245 x 98 x 98 mm | |
| Length | 245mm | |
| Mounting Type | Rack Mount | |
| Scan Time | 120 ns/log | |
| Depth | 98mm | |
| Total Memory Available | 32 MB |
CPU which can control up 256 local I/O, and store up to 8ksteps of program with 249 available instructions. The Q00JCPU system has a built-in 5 slot back plane, power supply and CPU making it simple to configure a system without extra hardware. Other useful features include PID instructions, support for floating-point numbers and networking capability. This cost-effective yet powerful processor is ideal for local and remote machine control, remote I/O networking of conveyors, pump control or any other PLC application.
All-in-one design makes system construction simpler
Easy to change or modify programs online
Flexible memory configuration to suit application needs
Built-in program back-up with FLASH ROM
| Processing Speed (bit) | 200ns |
| Processing Speed (word) | 700ns |
| Program Memory | 8kstep (32kbyte) |
| Additional Memory | 58kbyte ROM |
| Internal devices (registers, timers, etc.) | Up to 16.4kwords (32.8kbytes) |
| Additional devices | n/a |
| Max. Local I/O | 256 points |
| Power consumption (5Vdc) | 0.27A |
| Weight | 0.66kg |
The Mitsubishi Q Series is highly flexible. It can be a single or multi processor solution, with up to four CPUs installed on the same backplane. Users can also opt to swap PLC CPUs with motion control CPUs or even add a PC directly (as an intregal part) to the PLC backplane. Q Series can meet modern process challenges by offering an “Automation Rich Environment” from the combination of advanced PLC technology with Motion and a PC as one seamless solution with no networking requirement between them. The Q Series replaces the Mitsubishi A series of PLCs.
Easy to set up and to expand a system
Fast processing speeds and large memory capacity
Uses Windows based GX software
| For Use With | MELSEC Q Series | |
| Number of I/O | 2048 | |
| Manufacturer Series | MELSEC Q | |
| Input Type | Analogue, Digital | |
| Voltage Category | 5 V dc | |
| Output Type | Analogue, Digital | |
| Communication Port Type | RS232C | |
| Program Capacity | 32 kB | |
| Programming Interface | Computer, Operating Panel | |
| Total Memory Available | 58 kB | |
| Battery Backup | Yes | |
| Scan Time | 0.2 μs | |
| Number of Communication Ports | 1 | |
| Maximum Inputs/Outputs | 8192 | |
| Mounting Type | DIN Rail | |
| Length | 98mm | |
| Maximum Operating Temperature | +55°C | |
| Width | 245mm | |
| Dimensions | 98 x 245 x 98 mm | |
| Depth | 98mm | |
| Minimum Operating Temperature | 0°C |